Procare Manual / User Guide
Procare User Guide: This guide will help you “Get Started” with the basic things you’ll need to know about Installing Procare and Signing in, Set Up Locations and Users, Enabling Procare modules, Creating your Classrooms, Schedules, Tracking and Entering Families.
Install Update from CD
Procare 8″ Touch Computer
Touch Computer Install & Mount Assembly
Step-by-step instructions on installing your Procare Touch Computer as well as detailed illustrations and photos of various mounting options.
Biometric ID Pad Replacement Instructions
An instructional guide (with photos) walking through the steps necessary to replace the Procare Fingerprint Scanner
HDD Replacement Instructions
Step-by-step instructions on how to replace the hard drive of the Procare Touch.
Touch Computer Specs
Includes a wall mounting template, screenshots, technical specifications and features for the Procare Touch 8″.
Procare Touch Wall Mount Template
To scale, printable template used when mounting the Procare 8″ Touch for placement, measurements and hardware.
Door Controller (interior doors)
Network Door Controller: Installation
The Network Door Controller connects to the router on your network and to your electrically operated interior door. When a person completes the check-in process, the door circuit receives a signal to buzz the door open.
Network Door Controller: Setup Options
Five different ways to set up the Network Door Controller—an illustrated guide.
Serial Door Controller: Installation
The Serial Door Controller attaches to your Check-In computer and your electrically operated interior door. When a person completes the check in process, the door circuit receives a signal from the Door Controller to buzz the door open.
Keyless Entry System (exterior doors)
Keyless Entry System
The Door Controller attaches to your Check In computer and your electrically operated interior door. When a person completes the check in process, the door circuit receives a signal from the Door Controller to buzz the door open.
Keyless Entry: Keypad Cable – Wiring Pinout
Keyless Entry Keypads with serial number K-02-01618 and lower (shipped prior to March 2009). Newer keypads (ending in 01619 and higher) use a standard Cat5 straight through network cable.
Keyless Entry: Additional Relay
In a small number of installations, the onboard relay of the Keyless Entry System (KES) may be insufficient for the power requirements of the door strike system.
Check-In Ticket Printer
Zebra Printer LP2824 User Guide
This manual contains proprietary information of Zebra Technologies Corporation. It is intended solely for the information and use of parties operating and maintaining the equipment.