System Config - Door Controller

From the Setup menu, select System Config

Then select the Door Controller tile-

Select the Add New Door Controller Relay link-

Enter Door Controller detail, then press Save-

To Setup the Door Controller-

• Connect to the module’s website.

  • Retrieve the site’s IP address, 192.168.1.22 (for example), and access it.
    • For assistance, navigate to the Linortek Programming site and download the 'Linortek Discover for Windows'.

• Take note of the 'IP address' as you will use it in 'InSite Check-In' application.

  • Login with username and password. Username: admin, Password: admin
    

• Navigate to 'Settings' tab, then 'User and Admin Credentials'

  • Create a username for 'User 2’.

  • Create a password for 'Password 2’.

  • Mark the ‘Active’ checkbox which corresponds to 'User 2’.

  • Take note of this username/password as you will use it in 'Insite Check-In' application.

Note: Be sure to update the User 1 admin password, be sure to keep user ID’s and passwords secure to avoid any security threats.

• Navigate to 'Settings' tab, then 'Settings'
  • Find 'Use Active Main' and make sure it is checked.
  • Find 'Require Login' and make sure it is checked.
  • Find 'Use RESTful Authentication' and make sure it is checked.

• Navigate to 'Services' tab, then 'In/Out'
  • Take note of the relay number which is being used, as you will use it in 'InSite Check-In' app.

• Make sure settings match the below image:
  • Click ‘Save’ is anything was changed/added.